Desolder wick description:
    Type: CP-30B
    Length: 20m
    Width: 3.0mm

How to use:
1.Place the desoldering wick over the solder to be removed,then puh the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absortbability.

Package: 1 x CP-30B Desoldering Wick